Adjusting The Headlight - Betamotor RR 400 Bedienungsanleitung

4

ADJUSTING THE HEADLIGHT

• The light beam is adjusted manually by turning the headlight fixing screws on the
headlight fairing.
• Periodically check the direction of the beam. The beam can only be adjusted
vertically.
• Place the vehicle on level ground (but not on the stand) 10 metres from a vertical
wall.
• Measure the height of the headlight centre above the ground and then draw a
cross on the wall at 9/10 of the height of the headlight centre.
• Turn on the low beam, get on the motorbike and check that the headlight beam on
the wall is slightly lower than the cross drawn previously.
GB
10 m
142
9
x
x
10