Adjusting The Spring Preload - Betamotor RR 400 Bedienungsanleitung

Low-speed adjustment
•Using a screwdriver, loosen screw C by
turning it clockwise to decrease the hy-
draulic compression damper.
Standard adjustment:
Screw completely open, 21/21 clicks
High-speed adjustment
•Turn knob D anticlockwise to decrease
the hydraulic compression damper.
Standard adjustment
Knob completely open, 24/24 clicks
WARNING
Starting from the standard position, turn the
knob anticlockwise (with a closing action).
The central screw will move along with the
knob. This is normal, as the screw will be
in completely open position anyway.

ADJUSTING THE SPRING PRELOAD

To adjust the spring preload, use the pro-
cedure described below.
Loosen counter-ring 1. Rotate ring 2 clock-
wise to increase the spring preload (and
consequently the shock absorber preload)
or anticlockwise to decrease it.
After obtaining the desired preload, turn
counter-ring 1 until it stops against adjust-
ing ring 2.
Spring preload: 260 mm
ADJUSTING THE HYDRAULIC REBOUND
DAMPER
Turn screw 3 to adjust the hydraulic re-
bound damper.
Turning the screw anticlockwise (out) de-
creases the damping effect.
Standard adjustment:
25 clicks from the completely closed posi-
tion
C
D
131
3
1
2
3
GB