Installation And Configuration; Package Content; Flown Installation (Example Of 1 Array With 8 Modules) - dB Technologies VIO-L210 Bedienungsanleitung

5. INSTALLATION AND CONFIGURATION

PACKAGE CONTENT

Check that the package content of the VIO-L210 module is complete. The package contains:
• VIO-L210 Module
• fuse for operation in the 110-120V~ range (see the AMPLIFICATION AND CONTROL SECTION
CHARACTERISTICS section for more information)
• quick start and warranty documentation
!
WARNING
The product and accessories must be handled by experienced personnel only! Make sure that the installation
is positioned in a stable and safe manner in order to avoid hazardous conditions for people, animals and/or
objects. The user is required to follow regulations and mandatory laws on safety of the country in which the
product is used. For safe use, regularly check the operation of all parts and integrity before use.
Design, calculations, installation, testing and maintenance of suspended systems or professional audio stacks
must be performed by authorized personnel only. AEB Industriale is not responsible for improper installations,
non-compliant with safety requirements.

FLOWN INSTALLATION (EXAMPLE OF 1 ARRAY WITH 8 MODULES)

• Use the DBTECHNOLOGIES COMPOSER to set the project parameters.
• Verify that the local parameters of different modules are properly set on the individual amplifier
panels. In particular, verify according to the project: Audio Attenuation, Speaker Coupling and High
Frequency Compensation settings. Alternatively, you can remotely and in real time change all the
parameters, if the line array is connected via the RDNet network (DBTECHNOLOGIES NETWORK). In this
case it is also good practice to physically replicate the initial settings of the project on the VIO-L210
modules before the installation. For further information see the section
REMOTE CONTROL.
• Transport, through DT-VIOL210, the first 4 modules and the DRK-210 fly-bar to the spot in which
the line array will be lifted. Have a second cart (without a fly-bar) ready with other 4 modules for
the following assembly stages of the complete line array. For any relevant information, refer to the
manuals of these accessories.
THE CONNECTIONS SUGGESTED
IN THE FOLLOWING PICTURES
ARE FOR INFORMATION ONLY.
VIO-L210
52
English
DSP PRESET PARAMETERS AND
Cod. 420120248 REV. 1.1