Amplification And Control Section Characteristics - dB Technologies VIO-L210 Bedienungsanleitung

AMPLIFICATION AND CONTROL SECTION CHARACTERISTICS

The class D digital amplifier is the heart of the VIO-L210
modules.
It allows delivering up to 900 W RMS, silently and efficiently,
without ventilation. The system is controlled by a powerful DSP
that makes it possible to configure the line array in any usage
context, instantly and quickly.
Thanks to the ability of network connection with RDNet,
the panel parameters can be controlled remotely, due to
"dBTechnologies NETWORK" software (see the paragraph
DSP PRESET PARAMETERS AND REMOTE
The DIGIPRO G3 panel features:
• Input, Output and Control section
• Power Supply Section
!
WARNING
• Do not obstruct the rear heat sinks of the
amplifier. If the module heats up excessively,
the audio volume is gradually reduced until
VIO-L210 is thermally stabilised. The audio
is automatically restored when the normal
operating temperature is reached.
• Do not try in any way to open the amplifier.
• In the event of malfunction, immediately
turn off the power by disconnecting the
module from the power grid and contact
an authorized technician.
• It is preferable to use high quality cables
equipped with original Neutrik® connectors.
Check their integrity regularly.
• The speaker is supplied with a mounted fuse
for operation within the 220-240 V range.
If you need to operate in the 100-120 V voltage
range:
1.
2.
3.
WARNING
• Never remove the product's front protection mesh.
In order to prevent electric shock hazard, in the event of accidental damage or replacement of
the protection mesh (which must be carried out by a service center), disconnect the power supply
immediately.
Do not connect to the power supply while the mesh has been removed.
VIO-L210
40
CONTROL).
Disconnect all connections,
including the power supply.
Wait 5 minutes.
Replace the fuse with the one
provided in the package for the 100-
120 V range.
!
English
Cod. 420120248 REV. 1.1