Tips; Cleaning And Care - Klarstein 10031667 Handbuch

1. Meat left behind in the cutter housing may be removed from the inside of the appliance by passing a slice
of bread through the cutter housing.
2. Before you clean the appliance, switch the appliance off and remove the plug from the socket.
3. Press the release button and turn the whole cutter housing in the direction of the arrow. Remove the pusher
and the tray.
4. Unscrew the screw ring and remove all parts of the cutter housing.
IMORTANT: Do not clean the parts in the dishwasher!
5. Wash all parts that have come into contact with meat in hot soapy water.
IMORTANT: Clean the parts immediately after use!
6. Rinse them with clear hot water and dry them IMMEDIATELY.
7. We advise you to lubricate the cutter unit and the grinding discs with some vegetable oil.
Power Cord
Lash down the power cord, then foist it into the place with arrow diagramming.
If your appliance suddenly stops running:
1. Pull the mains plug out of the socket and press the switch button to turn off the
appliance.
2. Let the appliance cool down for 60 minutes.
3. Put the mains plug in the socket.
4. Press the circuit breaker button (H1) at the bottom of the appliance to turn on
the appliance.
5. Switch the appliance on again.
Reversal Button
If the appliance is locked, please press Reversal button (REV). The meat locked in
cutter housing is untrodden, so the appliance can renew its usual condition.
Strorage
The parts of "P", "Q", "R", " S" can be stowed in the pusher.

Cleaning and Care

Tips

24