Drying Tips - Klarstein 10033020 Bedienungsanleitung

EN
20
8 Check and Change the Temp during drying process:
Press the "TIME/TEMP" button first, the LED screen shows you the setting temp.
Then press the "+" or "-" button to change. 5 seconds after finish changing, LED
screen changes to time mode.
9 During drying process, press the "START/STOP" button, all functions will be paused.
The LED screen displays nothing.
10 END:
When the set time counts down to "0:00", the heating element stops working first.
The fan will continue running for 10 seconds and the buzzer rings 20 times "beep"
sound (1 time/second).
The LED screen display signal "End" means finish drying.
Note: If you do not have time to dry all the food in one day, you can dry them the
next day. In this case, you should store the food in a container/polyethylene bag and
put it in the freezer.
1 1 Unplug the unit from the power point.
General information on the dehydrator
• This dehydrator includes 6 drawer trays and an overheat protection. The main
engineer contains heating elements, motor, fan and thermostat.
• The air vents on the tray allow air to be circulated.
• Using a controlled heat temperature, Air from the back flow into each tray drying
moisture..
• Depending on the moisture in the food itself and the humidity in the air, drying
operation time can change. Use the dryer in a dust free, well ventilated, warm and
dry room. Well air ventilation is also important.
• Fruit and vegetables dried in your food dehydrator will be different in appearance
from those sold in health food stores and supermarkets. This is due to your food
dehydrator uses no preservatives, no artificial coloring and only natural additives.
• Records of humidity, weight of produce before and after drying times, will be
helpful to improving your drying techniques for the future.

Drying Tips

Drying time for pre-treatment fruit will vary according to the following factors:
• thickness of pieces or slices
• number of trays with food being dried
• volume of food being dried