Selecting A Keyboard Layout For Inputs Via Osd - G&D DL-DVI-Vision-IP-Series Installation Und Bedienung

Selecting a keyboard layout for inputs via OSD

If the on-screen display shows other characters than entered on the console key-
board, the keyboard layout has to be adjusted.
Make sure which keyboard layout the connected keyboard uses and configure it in
the settings of the user module.
How to change the keyboard layout of the keyboard of the user module:
1. Press Ctrl+Num
2. Select the row
3. Under OSD key. layout

German
 English (US)

English (UK)
 French
 Spanish

lat. American
 Portuguese
4. Press to save your settings.
F2
1. Click on IP Extenders > [All Extenders]
2. Double-click the computer module of the KVM extender you want to con-
figure.
3. Click on the tabs
4. Under Keyboard layout

German
 English (US)

English (UK)
 French

Spanish

lat. American
 Portuguese
5. Click OK to save your changes.
(default) to open the on-screen display.
Console setup and press
press F8 to select one of the following options:
on the directory tree.
Remote > General .
select one of the following options:
Enter .
G&D DL-DVI-Vision-IP-Fiber · 50
Configuration