Configuring A Kvm-Over-Ip Connection - G&D DL-DVI-Vision-IP-Series Installation Und Bedienung

4. Enter the following data under
Global Press
preferences:
 Static:
 DHCP:
Hostname:
Enter the device hostname.
Domain:
Enter the domain the device is to belong to.
Gateway:
Enter the gateway IP address.
DNS Server 1:
Enter the IP address of the DNS server.
DNS Server 2: Optionally, enter the IP address of another DNS server.
5. Press to save your settings.
F2

Configuring a KVM-over-IP connection

The of the user module (host) as well as the
IP address
module must be specified to establish a
puter module.
The configuration of both the
exchanged between the two modules.
NOTE: The configuration of both the
automatically exchanged between the two modules.
How to configure a KVM-over-IP connection:
1. Use the remote hotkey
2. Select the entry KVM Connection
3. Enter the following data under
Control Port:
Communication Port:
Data Port:
4. Enter the following data under
Host:
Control Port:
5. Press to save your settings.
F2
Establishing a KVM-over-IP™ connection for the first time
Main Network :
F8 to select the global preferences:
uses static settings.
obtains settings from a DHCP server.
KVM-over-IP
communication ports
communication ports
+ to open the OSD of the user module.
Alt Num
and press Enter
Local :
Enter the number of the port you want to use.
Enter the number of the port you want to use.
Enter the number of the port you want to use.
:
Remote
Enter the of the computer module.
IP address
Enter the number of the
computer module.
of the computer
control port
connection through the com-
and the data ports are automatically
and the
.
configured in the
Control Port
G&D DL-DVI-Vision-IP-Fiber · 16
are
data ports