G&D DL-DVI-Vision-IP-Series Installation Und Bedienung Seite 113

How to select the video mode of a console:
1. Press Ctrl+Num
2. Select the row
mode for the remote console (at the
Select the row
video mode for the local console (at the
3. Under Video mode
always on  image is always on (default)
switch off  switch off image for actions at the other console
4. Press F2 to save your settings.
1. Click on
IP Extenders > [All Extenders]
2. Double-click the computer module of the KVM extender to be configured.
3. Click on the tab
console (at the
Click on the tab
the remote console (at the
4. Under
Image display
 always on (default)

off for actions at remote/local console
5. Click to save your changes.
OK
Related topics:
 Changing the time span of the input lock on page 33
 Right for exclusive access to the console on page 34
(default) to open the on-screen display.
and press
Console setup
Local console setup and press
press F8 to select one of the following options:
on the directory tree.
Local if you want to adjust the video mode for the local
module).
CPU
Remote > General if you want to adjust the video mode for
module).
CON
select one of the following options:
if you want to adjust the video
Enter
CON module).
Enter if you want to adjust the
CPU module).
G&D DL-DVI-Vision-IP-Fiber · 36
Configuration