Information Display - G&D DL-DVI-Vision-IP-Series Installation Und Bedienung

Configuration

Information display

Information displays are shown temporarily (5 seconds) in the upper left corner.
ADVICE:
If the temporary information display is active, you can press the hotkey
Ctrl+Caps Lock to repeat the caption.
The information display can also be shown permanently or it can be disabled
How to change the setting of the information display:
1. Press Ctrl+Num
2. Select the row
3. Select the row
4. Under
Display
Off
Temporary
Permanent
5. Press to save your settings.
F2
1. Click on
IP Extenders > [All Extenders]
2. Double-click the computer module of the KVM extender you want to con-
figure.
3. Click on the tabs
4. Under
Display
Off
Temp
Perm
5. Click OK to save your changes.
53 · G&D DL-DVI-Vision-IP-Fiber
(default) to open the on-screen display.
Console setup and press
Personal Profile
press to select between the following options:
F8
 information display is turned off
 information display is shown temporarily for 5 seconds (default)
 permanent information display
Remote > Extender system > Personal profile
select one of the following options:
 information display is turned off
 information display is shown temporarily for 5 seconds (default)
 permanent information display
Enter .
and press Enter .
on the directory tree.
.