G&D DL-DVI-Vision-IP-Series Installation Und Bedienung Seite 85

Activate the generic HID
to connect another USB input device. In this mode, any data of the USB input device
is not altered when transmitted to the computer module.
IMPORTANT:
If the generic HID
keyboard connected to the
Mouse: Connect the PS/2 mouse of the console.
Keyb.: Connect the PS/2 keyboard of the console.
Connecting the console monitor
Connect the console monitor.
DVI-D DL Out:
Connecting audio and RS232 interfaces
If required, connect a microphone to this interface.
Micro In:
Speaker: Connect the speakers or another audio output device.
Connect the serial end device to this interface.
RS232:
mode (see Selecting the USB-HID mode on page 42) if you want
mode is active, the OSD cannot be operated by a
Generic socket.
Installation
G&D DL-DVI-Vision-IP-Fiber · 8