Spare Parts; Cleaning; Safety Information; Procedure - SystemAir IV Smart EC Montage- Und Betriebsanleitung

GB
The following check list provides points of reference for the tasks to be carried out.
Table 12 Activities
Check the fan and components for visible damage, corrosion and
contamination
Inspect the the rotor for damage and imbalance
Check that the condensate drain functions correctly
Clean the fan/ventilation system (see Chapter Cleaning)
Inspect screwed connections and tighten them if necessary
Ensure that the intake of the fan is free from dirt
Check that fan and components are being used as intended
Check the current consumption
Check that the vibration dampers function correclty (if used)
Check that the electrical and mechanical protective devices function
correctly
Check if the name plate of the fan is legible
Check that connection terminals and cables glands are tightly screwed and
have no visible damage/defects
Check flexible connections for leaks
Note:
If you have questions, please contact Systemair. Defective fans must be completely replaced.

11.5 Spare parts

♦ Use original spare parts from Systemair only.
♦ When ordering spare parts, please specify the serial number of the fan. This can be found on the name plate.
12

Cleaning

12.1 Safety information

♦ Cleaning may only be carried out by adequately qualified persons, details see Table 1 Qualifications, page 6.
♦ Wear protective equipment during all work in the vicinity of the fan, details see 2.2 Personal protective equipment,
page 6.
♦ Observe the 5 rules of electrical safety, see 2.3 5 rules of electrical safety, page 6.
♦ Ensure that the power supply has been switched off (all-pole circuit breaker).
♦ Ensure that the rotor is at a standstill.

12.2 Procedure

Important
Keeping the fan clean extends its service life.
♦ Install a filter monitor.
♦ Do not use steel brushes or sharp-edged objects.
♦ Do not use a high-pressure cleaner (steam jet cleaner) under any circumstances.
♦ Do not bend the fan blades when cleaning.
♦ When cleaning the rotor, pay attention to balance weights that have been positioned
♦ Keep the airways of the fan clear and clean them if necessary with a brush.
| 002
Activity
Cleaning |
As required Periodic intervals
X
X
X
X
X
X
X
X
X
X
X
X
X
21