•
The paper filter type can only be cleaned by dusting it off or by blowing
compressed air through it.
•
Once cleaned, all items should be reassembled in their original position.
The machine offers the highest efficiency and has the highest operating speed
•
when the blades are sharp. Enhance your own working comfort by taking some
time to check the blades, and if necessary, sharpen them for every job.
•
Tip the machine forwards so it is resting on the
front support and the steering handle (see
illustration).
Move the safety net forwards and dismantle the
•
screen located at the rear of the machine. by
pulling the two sliding pins.
Tip : Use circlips to hold up the rubber flap which
hangs at the rear of the machine as protection against
flying chips.
•
The cutting edge of the blades can now easily be
sharpened using an angle grinder.
68
Caution:
If the machine accidentally falls over, it should be placed upright again as
soon as possible. When the engine ends up in an unusual position it is
possible for oil from the crankcase to flow onto the air filter via the
carburettor. As oil on the paper of the filter prevents air from passing
through, the filter has to be replaced. Considering the price of these filters it
is best to avoid this.
11.4.4 Sharpening the blades
SHARP BLADES = MAXIMUM EFFICIENCY
For information:
The blades do not have to be removed in order to be sharpened.
Warning:
If the machine topples over, petrol can leak out of the filler plug of the
reservoir. Use a siphon to pump excess petrol from the reservoir because
sparks from grinding can cause fire.
Warning:
Always wear safety glasses and ear defenders when sharpening the blades.
Gloves are also compulsory when commencing maintenance work.