Saving The Settings; Restoring The Factory Settings - Mettler Toledo BPA224 Bedienungsanleitung

METTLER TOLEDO BPA224 Scales
10
SAVE
c
r478
ABOMT
c
r478
DEF NO
b
DEFXES
4.2 Menu overview (user menu and service mode)
Menu block Settings
CTY
EU
GE
DEF
No
Yes
S1
Off
On
S2
On
Off
S3
0
1
2
3
4
5
6

Saving the settings

If you want to save the settings, press the c key. When the save has
been done, the scale automatically returns to weighing mode.
Rejecting the settings
If you do not want to save you changes, press the b key. The
display shows "Abort". Press the c key and the scale returns to
weighing mode without the changed settings being saved.

Restoring the factory settings

The factory settings can only be restored in service mode in the menu
block "DEF" ("Default"). If you want to restore the factory settings,
select "DEF YES" and confirm with the c key. Then press the a
key and confirm the "SAVE" prompt with the c key. Note: When the
factory settings are restored, all individual settings are lost!
Explanation
Selects the region (determines which weighing units are available under "S5")
Europe
USA
Restores the factory settings
Do not restore the factory settings
Restore the factory settings (happens immediately after confirmation!)
Automatic switchoff function (see description in Chapter 3.1)
Deactivates the automatic switchoff function
Activates the automatic switchoff function
Energy-saving mode (see description in Chapter 3.1)
Activates the energy-saving mode
Deactivates the energy-saving mode
Limit-value monitoring (see description in Chapter 3.4)
No limit-value monitoring (F key and alarm via beep and LEDs deactivated)
Limit-value monitoring activated, behavior of LEDs and beep (see description in Chapter 3.4).