Settings In The Menu; Operating The Menu - Mettler Toledo ICS226 Bedienungsanleitung

4.1 Operating the menu

4.1.1 Calling up the menu and entering the password
4.1.2 Entering numeric values
30232252A ICS226
All manuals and user guides at all-guides.com

4 Settings in the menu

The menu consists of the following 6 main blocks which contain various submenus on
several levels:
F1 – Scale menu
F2 – Application menu
F3 – Terminal menu
F4 – Communication menu
F5 – Maintenance menu
End – Exit menu
The menu has 2 different operating levels: operator and supervisor. The operator level
provides access to the F2, F3 and F4 menus only. In the supervisor level, all menus are
accessible.
➜ Press and hold
Operator level password
Supervisor level password
If F1.1 = OIML or NTEP is set:
The following settings are NOT accessible : F1.1, F1.2, F1.3, F1.4, F1.7, F2.1 and F4.3.
1. Press to edit the displayed value.
2. Increase the displayed value using the
3. When entering multi-digit values, use the
the left.
4. Repeat steps 2 and 3, if necessary.
5. When all values are entered, use the
until PSD is displayed to prompt the user for a password.
key.
key to move the cursor one position to
key to confirm the changes.
11
Settings in the menu