Mettler Toledo BPA224 Bedienungsanleitung Seite 9

CTX EU
S1 OFF
c
S2 ON
S2 ON
b
S2 OFF
S2 OFF
c
S3
S3
F
S2 OFF
SAVE
a
"Setup" appears briefly in the display and then the first menu block of
service mode ("CTY") appears.
Selecting the menu block
Press the c key to confirm the setting in the current menu block and
then select the next menu block.
Changing the setting
After you have selected the desired menu block, you can use the b
key to switch between the available settings. The number of available
settings differs according to the menu block.
Confirming the setting
When the desired setting has been made (or if there is no need to
change the current setting), it must be confirmed by pressing the c
key. The next menu block then appears automatically in the display.
O
Navigating backwards in the menu
If you wish to navigate backwards in the menu, i.e. display the
O
previous menu block again, you can do so at any time with the F key.
This way you can check the settings you made and change them
again if necessary.
Quitting the menu
When you have made all the desired settings, press the a key.
You will be asked whether you wish to save the settings ("SAVE").
Note: This question also appears after the last menu block.
METTLER TOLEDO BPA224 Scales
9