Daily Operation; Simple Weighing - Mettler Toledo BPA224 Bedienungsanleitung

METTLER TOLEDO BPA224 Scales
6
3

Daily operation

3.1 Switching the scale on and off
z000
c
c 0FF
. . . . . .
3.2

Simple weighing

z000
a
r478
To switch the scale on: Check that there is nothing on the weighing
pan. Press the c key until the display appears. After the scale has
been switched on, it performs a self-test in which all the segments
and then various items of information about the scale are briefly
displayed. When the weight display appears, the scale is ready to
weigh and is automatically set to zero (the LED above the a
symbol is lit).
To switch the scale off: Press the c key and hold it down until "OFF"
appears in the display. The display then goes out, and the scale is
switched off.
Energy-saving function and automatic switchoff
For battery operation the scale has an energy-saving function and
an automatic switchoff function which can be both activated and
deactivated in the menu (Chapter 4).
If the energy-saving function is activated (factory setting), when the
scale is powered from the battery it automatically switches into
"Standby" mode after two minutes if no weight change takes place
and no key is pressed. The display is filled with decimal points instead
of digits. As soon as a weight is placed on the pan or a key is pressed,
the scale returns to normal weighing mode.
If the automatic switchoff function is activated (it is deactivated at
the factory), the scale switches off automatically after 15 minutes in
"Standby" mode.
• Set the scale to zero with the a key. The LED above the a
symbol lights as confirmation.
• Place the item to be weighed on the pan. The LED above the a
symbol goes off.
• Read off the weighing result. The LED to the right of the weighing
result shows the current weighing unit (the unit can be changed in
the menu, see Chapter 4).