Leveling; Connecting The Pba220 Weighing Platform To The Weighing Terminal - Mettler Toledo PBA220 Bedienungsanleitung

0.000 kg
10.520 kg
0.000 kg
8
Installation and operation

3.3 Leveling

Only a weighing platform which is aligned exactly horizontally supplies exact weighing
results. The weighing platform has to be leveled during the initial installation and whenever
its location is changed.
1. Turn the adjustable feet of the weighing platform until the air bubble of the spirit level
is positioned in the inner circle.
2. Tighten the lock nuts of the adjustable feet.
3.4 Checking the weighing platform
Function check
Before starting a weighing series, perform a function check of the weighing platform and
the connected weighing terminal.
1. Make sure that the weighing platform is connected to a weighing terminal and that the
weighing terminal is switched on.
2. Make sure that the weighing platform is unloaded and the display of the weighing
terminal shows 0.
3. Load the weighing platform. The display must show a value different from 0.
4. Unload the weighing platform. The display must return to 0.
Verification test
For a verification test refer to the user manual of the connected weighing terminal.
If the verification seal is broken, verification is no longer valid.
PBA220 30303655A