Camera Control Unit - Sony ExwaveHAD DXC-C33 Gebrauchsanweisung

Camera Control Unit

Front
FREEZE
SCENE FILE
SELECT
BARS
CAMERA
GAIN
0dB
Rear
OUT PUT FS/TRIG IN
VIDEO
DV
REMOTE
S-VIDEO RGB/SYNC
8
GB
Location and Functions of Parts and Controls
AE AREA
BLACK MENU SELECT
WHITE
ENTER LOCK
RED GAIN BLUE AE LEVEL
24dB – + – + – +
EXT SYNC
HD
A C I N
VD/SYNC
(power) switch and indicator
1 !
Press the switch down to turn on the
power of the unit. The indicator lights in
green. To turn off the power, press the
switch again. The indicator turns off.
Note
Be sure to connect the camera head and
camera control unit with the camera cable
(not supplied) before you turn the camera
on or off.
2 FREEZE button and indicator
Pressing this button stores an image in
the built-in frame memory and outputs it
as a freeze picture. When the freeze
picture mode activates, the indicator
lights. Pressing the button again turns
off the indicator and cancels the freeze
picture mode. The image currently shot
is displayed on a monitor screen.
/FILE SELECT button
3 B
While the menu is displayed:
Decreases the setting value or changes
the setting. Also use this button for an
AE window setting, etc.
While the normal screen is displayed:
Switches the user preset file between A
and B.
/BLACK (black balance) button
4
V
While the menu is displayed: Moves
the menu cursor upward. Also use this
button for an AE window setting, etc.
While the normal screen is displayed:
Activates the automatic black balance
adjustment.
/ WHITE (white balance)
5 b
button
While the menu is displayed: Increases
the setting value or changes the setting.
Also use this button for an AE window
setting, etc.
While the normal screen is displayed:
Activates the automatic white balance
adjustment when MODE is set to AWB
in WHITE BALANCE menu.