Connections for Displaying a Freeze Picture Using a Foot Switch
This section explains how to connect an optional foot switch to store an image
in the frame memory of this camera and to output the freeze picture to a printer,
etc.
Video monitor,
VCR, etc.
Video input
connector
75-ohm
coaxial cable
Printer, etc.
Note
• The foot switch must comply with Standard UL2601-1/EN60601-1.
• When connecting a foot switch, set FS/TRIG IN to FS in the GENERAL
menu (page 21).
• When you output a freeze picture to a printer, etc., set D-SUB SYNC to
WEN-ODD or WEN-EVEN in the SYSTEM menu (page 22).
Foot switch
FS/TRIG IN
T VIDEO
OUTPUT
OUT PUT
VIDEO
S-VIDEO
Remote connector
Video input
CCMC-9DSMN/CCMC-9DS/
connector
CCXC-9DB camera cable
Camera
head (rear)
CCMC-20P05/10/30
Camera control unit (rear)
FS/TRIG IN
EXT SYNC
DV
HD
A C I N
REMOTE
RGB/SYNC
VD/SYNC
RGB/
SYNC
camera cable
CAMERA
(front)
Power cord
39
Connections
GB