White Balance Menu - Sony ExwaveHAD DXC-C33 Gebrauchsanweisung

DYNALATITUDE
Adjusts the contrast according to the
luminance level of each picture element. The
setting is useful for shooting scenes mixed
with bright and dark parts.
You can set the level within the range from
–10 to +10.
GAMMA
Activates gamma compensation.
OFF
Outputs the video signal linearly without
gamma compensation. Use this setting when
you want to produce images for image
processing or image analysis.
ON
Compensates the reproduction
characteristics of a cathode-ray tube of a
monitor to produce natural-tone image.
LEVEL
Adjusts gamma so that you can obtain
natural-tone image. Adjustable range is from
–10 to +10.
MASTER PEDESTAL
The pedestal levels of the G, B and R output
signals can be adjusted simultaneously.
Adjusts the darkness level of the black part
of the image. Use this function to bring out
details in heavily shaded areas. Use of a
waveform monitor allows easier adjustment.
The adjustable range is from –127 to +127.
The whole screen becomes whiter when you
adjust the level in the direction of +.
The whole screen becomes blacker when
you adjust the level in the direction of –.
Normally set to ±0.
R. (red) PEDESTAL, B. (blue)
PEDESTAL
Use these items to finely adjust the pedestal
level of each color. Adjust them while
watching the monitor screen. The items can
be finely adjusted within the range from
–127 to +127.
WHITE BALANCE
Menu
The WHITE BALANCE menu is used to
adjust the white balance.
<WHITE BALANCE>
>MODE
R. PAINT
B. PAINT
AREA
Select
MENU
MODE
Selects the white balance modes.
AWB
Select to adjust the white balance
automatically (auto white balance).
R. (red) PAINT, B. (blue) PAINT
Use the GAIN RED or BLUE control on
the camera control unit to make fine
adjustments. Finely adjusts the red or blue in
the range from –100 to +100. Adjust them
while watching the monitor screen.
When adjusted, the set values change to the
adjusted levels.
For details, see "Adjusting the White
Balance" on page 26.
AREA
A detecting window appears on the monitor
screen. Normally set to NORMAL. If you
want to display the desired window, set to
MANUAL and follow the steps below.
1 Press the ENTER button.
2 Move the left top cross cursor with the B,
b, V or v button to set the upper and left
side size, and press the ENTER button.
3 Move the right bottom cross cursor with
the B, b, V or v button to set the lower and
right side size, and press the ENTER
button.

WHITE BALANCE Menu

[A]
AWB
+ _
0
+ _
0
NORMAL
Back
17
GB