Installation and Connections
B
Installation
Applicable Lens
C-mount lenses with the following lens
mount surface can be attached to the camera
head.
4.3 mm
or less
Note
Be sure to use a lens whose projected part
from the lens mount surface is less than 4.3
mm. Mounting the lens with a projected part
greater than 4.3 mm may damage the
internal mechanism of the camera head.
Mounting the Lens
1
Remove the lens mount cap of the
camera head.
28
GB
Installation
2
Lens mount
surface
3
Mounting a Microscope
Adaptor
To attach the camera to a microscope or a
surgical microscope, it is necessary to attach
an appropriate adaptor.
The mounting procedure is the same as that
of the lenses.
For details, refer to the instruction manual
for the adaptor to be used.
Mounting on a Tripod
Attach the supplied tripod adaptor to the
camera head, then mount the adaptor on a
tripod using the following mounting screw:
Align the threaded portion of the lens
mount with that of the camera mount.
Slowly rotate the lens clockwise to fix
the lens to the camera head tightly.
U1/4", 20 UNC
= 4.5 mm ± 0.2 mm
(ISO standard)