Erasing A Track Mark; Moving Recorded Tracks; On The Recorder - Sony MD Walkman MZ-R90 Bedienungsanleitung

Erasing a track mark

When you record with analog (line) input,
unnecessary track marks may be recorded
where recording level is low. You can
erase a track mark to combine the tracks
before and after the track mark. The track
numbers will change as follows.
Erase a track mark
1 2
1 2
Track numbers decrease
X
.
1
While playing the track with the track
mark you want to erase, press X to
pause.
2
Find the track mark by pressing .
slightly.
For example, to erase the third track
mark, find the beginning of the third
track. "00:00" appears in the display.
"MARK" appears in the display for 2
seconds.
3
Press T MARK to erase the mark.
"MARK OFF" appears in the display.
The track mark is erased and the two
tracks are combined.
z
When you erase a track mark, the date, time,
and name assigned to the mark are also erased.
3 4
3
T MARK

Moving recorded tracks

You can change the order of the recorded
tracks.
Example
Move track C from the third to the second
track.
Before moving
A B
A C
After moving

On the recorder

Jog lever
x
1
While playing the track you want to
move, press the jog lever so that
"EDIT" flashes in the display, and
then press the lever again.
" : Name" flashes in the display
and the recorder plays the selected
track repeatedly.
2
Flip the jog lever until "
flashes in the display, and then press
the lever.
For the example above, "MV 003 t
003" appears in the display.
C D
B D
T MARK
: Move"
continued
33
-GB