Informal Safety Precautions; Safety Precautions At The Installation Location; Safety Inspection - Castolin Eutectic TotalArc2 3000 Betriebsanleitung/Ersatzteilliste

- When hoisting the wirefeed unit by crane, always use an
insulating suspension arrangement.

Informal safety precautions

- The instruction manual must be kept at the welding-machine
location at all times.
- In addition to the instruction manual, copies of both the
generally applicable and the local accident prevention and
environmental protection rules must be kept on hand, and
of course observed in practice.
- All the safety instructions and danger warnings on the
welding machine itself must be kept in a legible condition.
Safety precautions at the installation
location
- The welding machine must be placed on an even, firm floor
in such a way that it stands firmly. A welding machine that
topples over can easily kill someone!
- Special regulations apply to rooms at risk from fire and/or
explosion. Observe all relevant national and international
regulations.
- By means of internal instructions and checks, ensure that
the workplace and the area around it are always kept clean
and tidy.
Safety precautions in normal operation
- Only operate the welding machine if all its protective features
are fully functional.
- Before switching on the welding machine, ensures that
nobody can be endangered by your turning on the machine.
- At least once a week, check the machine for any damage
that may be visible from the outside, and check that the
safety features all function correctly.

Safety inspection

The owner/operator is obliged to have the machine checked
for correct functioning by a trained electrician after any
alterations, installations of additional components,
modifications, repairs, care and maintenance, and in any case
at least every six months.
In the course of such inspection, the following regulations
must be observed (as a minimum):
- VBG 4, §5 - Electrical plant and apparatus
- VBG 15, §33 / §49 - Welding, cutting and allied processes
- VDE 0701-1 - Corrective maintenance, modification and
testing of electrical equipment
Alterations to the welding machine
- Do not make any alterations, installations or modifications
to the welding machine without getting permission from the
manufacturer first.
- Replace immediately any components that are not in perfect
condition.
Spares and wearing parts
- Use only original spares and wearing parts. With parts
sourced from other suppliers, there is no certainty that
these parts will have been designed and manufactured to
cope with the stressing and safety requirements that will be
made of them.
- When ordering spare parts, please state the exact
designation and the relevant part number, as given in the
spare parts list. Please also quote the serial number of your
machine.
Calibration of welding machines
In view of international standards, regular calibration of welding
machinery is advisable. Castolin recommends a 12-month
calibration interval. For more information, please contact your
Castolin partner!
CE-marking
The welding machine fulfils the fundamental requirements of
the Low-Voltage and Electromagnetic Compatibility Directive
and is thus CE-marked.
Guarantee
The guarantee period is 12 months and applies to single-shift
operation, provided that the equipment is used properly.
The guarantee covers the costs for replacement parts and
component groups including assembly time. The guarantee
does not cover wear and tear of com-ponents due to operation.
Improper use of the equip-ment including damage caused by
force invalidates the guarantee.
Please forward the serial number of the equipment in the event
of any guarantee claim.
Return of the equipment requires our prior consent. Transpor-
tation and related costs will be at the expense of the purchaser
(please refer to the General Sales Conditions).
Copyright
Copyright to this instruction manual remains the property of
Castolin.
Text and illustrations are all technically correct at the time of
going to print. Right to effect modifications is reserved. The
contents of the instruction manual shall not provide the basis
for any claims whatever on the part of the purchaser. If you have
any suggestions for improvement, or can point out to us any
mistakes which you may have found in the manual, we should
be most grateful.
ud_ca_st_sv_00217 022000