Adding/Deleting Somfy Control Points And Sensors; Adding/Deleting An Rts Control Point; Adding/Deleting An Rts Sensor - SOMFY J4 RTS Installationsanleitung

6.2. Adding/Deleting Somfy RTS control points and sensors

6.2.1. Adding/Deleting an RTS control point

• Find an RTS control point programmed in the motor.
• Press the PROG button on the RTS control point (A) until
the E.V.B.moves briefly: the motor is in programming
mode.
• Press the PROG button on the RTS control point (B)
briefly. The E.V.B. moves briefly.
The RTS control point has been programmed or deleted
from the motor.

6.2.2. Adding/Deleting an RTS sensor

• Find an RTS control point programmed in the motor.
• Press the PROG button on the RTS control point (A) until
the E.V.B. moves briefly: the motor is in programming
mode.
• Press the PROG button on the RTS sensor (C) briefly. The
E.V.B. moves briefly.
The RTS sensor is programmed or deleted from the motor.
6.2.3. Deleting all the RTS sensors
• Find an RTS control point programmed in the motor.
• Press the PROG button on the RTS control point (A) until
the E.V.B. moves briefly: the motor is in programming
mode.
• Press and hold the PROG button on the RTS sensor (C)
for 7 seconds. The E.V.B. moves briefly twice.
The RTS sensors are deleted from the motor.
© 2013-2016 Somfy SAS. All rights reserved.
+
PROG. PROG.
A
B
PROG. PROG.
A
-
PROG.
PROG.
A B
PROG. PROG.
A
+
PROG.
PROG.
C
A
PROG.
PROG.
A
C
-
C
PROG.
PROG.
C
A
PROG.
PROG.
A
B
B
C
C
C
C
C
C
81