Installation; Open Below; 58 X 56 Mm Head Rail, Open Above - SOMFY J4 RTS Installationsanleitung

2. INSTALLATION

2.1 57 X 51 mm or 58 x 56 mm head rail, open below
• Screw the 2 adaptors (1) using 2 M3x8 bolts (2) on
the motor shaft.
Tightening torque = 1,35 N.m +/- 20%
• Connect the connection cable (3) to the motor.
Ensure that the cable does not pass over a rotating part
of the motor or mechanism.
• Compress the edge of the head rail (4) into the motor
zone.
• Insert the motor into the head rail (4).
• Using the clips (5), attach the motor in the head rail
(4) above the small acoustic tapes (6a).
• The shaft can be fitted into the adapter using a
headless screw (7).
Tightening torque = 2 N.m maximum

2.2 58 x 56 mm head rail, open above

Installation with external clips
• Screw the 2 adaptors (1) using 2 M3x8 bolts (2) on
the motor shaft.
Tightening torque = 1,35 N.m +/- 20%
• Connect the connection cable (3) to the motor.
Ensure that the cable
a rotating part of
• Insert the motor into the head rail (4).
• Using the clips (5), attach the motor in the head rail
(4) above the small acoustic tapes (6a).
• The shaft can be fitted into the adapter using a
headless screw (7).
Tightening torque = 2 N.m maximum
70
does not pass
the motor or mechanism.
1
2
7
7
5
7
2
1
over
5
7
© 2013-2016 Somfy SAS. All rights reserved.
2
1
7
3
5
4
6a
3
7
2
1
6a
7
4
6a