6.6. Diode Measurement
1.
Connect the black test lead to the COM jack and the red test lead
to the V/Ω/-mA-jack. (Note: the polarity of the red test lad is "+")
2.
Set the function switch to the
3.
Connect the test leads across the diode under measurement.
Note:
1.
When the input is not connected, i. e. at open circuit, the
figure "OL" will be displayed for the overrange condition.
2.
There is 1 mA current flow through the device under test
3.
The meter displays the forward voltage drop in millivolts,
and overload when the diode is reversed.
-range.
-35-