Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6.3. AC Voltage Measurement
1.
Connect the black test lead to the COM jack and the red test
lead to the V/Ω/ mA-jack.
2.
Set function switch to the AC V range to be used and connect the
test leads across the source or load under measurement.
Note:
1.
If the voltage range is not known beforehand set the function
switch to the highest range and work down.
2.
Caution: Do not apply more than 600 V
Indication is possible at higher voltages but there is danger of
damaging the internal circuitry.
3.
Use extreme caution to avoid contact with high tension circuits
when measuring high voltage.
-32-
to the input.
rms
Werbung
Inhaltsverzeichnis
