Preparing The Measurement - Beurer BM 49 Gebrauchsanweisung

Information on the display:
1. Inflate , release air
2. Systolic pressure
3. Memory display:
average value ( ),
morning ( ), evening (
4. Diastolic pressure
5. User memory
6. Calculated pulse value
7. Cardiac arrhythmia symbol
8. Time and date
9. Risk indicator
10. Memory space number
11. Battery replacement symbol

4. Preparing the measurement

Insert the batteries
• Open the battery compartment lid.
• Insert four 1.5 V AA (alkaline type LR6)
batteries. Make sure that the batteries
are inserted with the correct polarity,
according to the label. Do not use re-
chargeable batteries. The message "The
device is ready for use. You may start
measuring." is displayed.
• Close the battery compartment lid again carefully.
• With inserted batteries, the unit permanently displays the
time and date.
11
10
)
9
8 7
4 x AA (LR6) 1,5 V
If the the low battery indicator
1
ments can be performed. The device will announce: "Battery weak."
Please replace all batteries. Once the batteries have been removed from
2
the unit, the date, time and language must be set again.
3
Used batteries should not be disposed of in normal household waste.
Dispose of them via your electronics retailer or your local recycling point.
4
You are legally obligated to do so.
5
Battery disposal
6
• The empty, completely flat batteries must be disposed of through spe-
cially designated collection boxes, recycling points or electronics retail-
ers. You are legally required to dispose of the batteries.
• The codes below are printed on batteries containing harmful
substances:
Pb = Battery contains lead,
Cd = Battery contains cadmium,
Hg = Battery contains mercury
Set date, time and language
This menu allows you to set the following functions, one after another.
Date Time Language
It is essential to set the date and time. Otherwise, you will not be able to
save your measured values correctly with a date and time and access them
again later.
The time is displayed in 24-hour format.
In addition, the device has 4 language settings. The device is set to Ger-
man when supplied to the customer.
61
and appear, no further measure-
Volume