Yamaha PLG100-VL Bedienungsanleitung Seite 22

Editing VL Voice Part Parameters
10. Damping
Dmp CC No. (Damping Control Change Number) .... Settings: off ... 95, AT, VEL, PB
"Damping" simulates the effect of damping due to losses within the body of a wind
instrument or in a string due to air friction. Affects both pitch and timbre. The "Dmp
CC No." parameter specifies the controller to be used for damping control. When set to
"off" no damping variation can be applied via a controller.
DmpCtrlDpt (Damping Control Depth) .................................. Settings: -64 ... +63
Sets the amount of variation produced by the controller assigned to damping. The
higher the value the greater the variation. Positive values cause a decrease in damping
in response to higher controller values (e.g. increased breath pressure or higher modu-
lation wheel position), while minus values cause an increase in damping in response to
higher controller values.
11. Absorption
Abs CC No. (Absorption Control Change Number) ....... Settings: off ... 95, AT, VEL, PB
"Absorption" simulates the effect of high-frequency loss at the end of the air column
or string. The "Abs CC No." parameter specifies the controller to be used for absorp-
tion control. When set to "off" no absorption variation can be applied via a controller.
22
• Please note that accurate keyboard pitch is produced only when damping is maximum.
• Please note that accurate keyboard pitch is produced only at when absorption is maximum.