Installing The Scale; Power Supply; Fcc Rules - Sartorius PMA.Evolution EVO1S1 Installationsanleitung

3.3 Installing the Scale

Inserting the Weighing Pan
t

3.4 Power Supply

The scale is normally powered via the USB connection of
your PC, which also supplies data for the scale. If this
USB connection is not available, you can use AC adapter
YPS06-USB (see chapter "6. Accessories," page 7) for the
power supply, which comes with different, country-specific
mains adapters. AC adapter assembly is described in the
following.
3.4.1 AC Adapter Assembly (optional)
Using the wrong mains adapter may cause
fatal electric shock and damage the
equipment.
Never plug the mains adapter into the socket
when it is disconnected from the AC adapter
(danger of electrical shock).
t
Use the right mains adapter for your mains power supply:
Mains adapter set YAK01
Bag Region/Country
a) transparent Europe/EU (except United Kingdom)
b) blue USA
c) yellow United Kingdom
Mains adapter set YAK02
d) red Australia
e) turquoise South Africa
f) white Argentina
g) pink Brazil
Place the weighing pan onto the
scale from above.
Mains adapter set YAK03
h) light brown China
i) black India
j) green Korea
t
Removing / Replacing the Mains
Adapter
t
Power Connection / Safety Precautions
− Only use original Sartorius AC adapters.
The AC adapter has an IP rating of IP40 in accordance with
EN 60529 / IEC 60529.
− Make sure that the voltage rating printed on this unit
matches the voltage at the place of installation.
− If the stated supply voltage or the plug design of the AC
adapter does not comply with your country's standard,
please inform the nearest Sartorius representative.
− The power must be connected in accordance with the
regulations applicable in your country.

FCC Rules

Safety Precautions:
NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protec-
tion against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
Increase the separation between the equipment and receiver.
− Connect the equipment into an outlet on a circuit different from
that to which the receiver
− Consult the dealer or an experienced radio/TV technician for help.
Shielded Cables:
Connections between the devices and peripherals must be made
using shielded cables in order to maintain compliance with FCC radio
frequency emission limits.
Modifications:
Any modifications made to this devices that are not approved
by Sartorius Weighing Technology GmbH may void the authority
granted to the user by the FCC to operate this equipment.
Installation Instructions EVO1S1 | SPO1S1
English
Push (1) and slide (2) the mains
adapter required for your power
supply into the opening of the
AC adapter module.
When doing this, the mains
adapter needs to lock into
position.
Unlock (1) the mains adapter
and then detach (2) it.
5