Lubrication Before First Use; Cleaning; Disposal - Holzmann ED 1000N Originalbetriebsanleitung

15.1.2 Lubrication before first use

Bevor Sie die Maschine das erste Mal in Betrieb nehmen, müssen alle Laufflächen geschmiert
werden. Zudem müssen die Ölstände sämtlicher Ölbehälter kontrolliert werden und
gegebenenfalls auf das richtige Niveau nachgefüllt werden.
Before using for the first time the machine is in operation, all running surfaces must be
lubricated. In addition, the oil levels of all oil tanks must be checked and replenished if necessary
to the proper level.
It is recommended the first half hour with a maximum speed of 300U / min
After this period of the machine can be used to its fullest extent
15.2

Cleaning

The use of solvents, harsh chemicals or abrasive cleaners leads to damage to the machine!
Therfore: When cleaning water and mild detergent if necessary use.
Bare surfaces of the machine against corrosion impregnate ( with anti-rust WD40 )
15.3

Disposal

Do not dispose of the LBM 290K in residual waste. Contact your local
authorities for information regarding the available disposal options. When you
buy at your local dealer for a replacement unit, the latter is obliged to exchange
your old
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
METALLDREHMASCHINE / METAL TURNING LATHE ED 1000N / ED 1000NDIG
N O T E
MAINTENANCE
Seite 49