Floor Installation - Holzmann ED 1000N Originalbetriebsanleitung

ASSEMBLY
Now screw the machine with the supplied screws properly on the base firmly. Only when the
machine is properly secured, the possible manufacturing accuracy of the machine can be
maintained.

13.2.3 Floor Installation

The machine can also be fixed on the foundation. The necessary fasteners are not included. For
the holes in the foundation of the following sketch spectrum can be used. However, it
recommends you the current spacing of the holes again remeasure suggesting possible
manufacturing tolerances of the holes can not be considered.
It is also advisable to lay low noise and vibration damping material between the foundation and
the machine.
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at Seite 38
METALLDREHMASCHINE / METAL TURNING LATHE ED 1000N / ED 1000NDIG