Emergency Procedure - Holzmann ED 1000N Originalbetriebsanleitung

 Use personal safety equipment: ear protectors and safety goggles when working
with the machine.
 Never leave the machine running unattended! Before leaving the working area
switch the machine off and wait until the machine stops.
 Always disconnect the machine prior to any actions performed at the machine.
 Avoid unintentional starting
 Do not use the machine with damaged switch

 The plug of an electrical tool must strictly correspond to the socket. Do not use
any adapters together with earthed electric tools
 Each time you work with an electrically operated machine, caution is advised!
There is a risk of electric shock, fire, cutting injury;
 Protect the machine from dampness (causing a short circuit)
 Use power tools and machines never in the vicinity of flammable liquids and
gases (danger of explosion)
 Check the cable regularly for damage
 When working with the machine outdoors, use extension cables suitable for
outoor use
 Do not use the cable to carry the machine or to fix the work piece
 Protect the cable from heat, oil and sharp edges

Avoid body contact with earthed
 Before starting the machine remove any adjusting wrenches and screwdrivers
 Use a clip or clamping jaws to secure the workpiece
 Do not fix the workpice with your hands
 Rotating parts can cause severe cut injuries
 Keep the drills sharp and clean, so they get stuck less often and are easier to
guide
 Keep any machine that is not being used out of reach of children
A first aid kit in accordance with DIN 13164 should always be readily available for
a possible accident. Initiate the violation in accordance with the necessary first
aid measures. When requesting support, provide the following details:
1. Place of accident
3. Number of injured people
HOLZMANN MASCHINEN GmbH

Emergency procedure

www.holzmann-maschinen.at
METALLDREHMASCHINE / METAL TURNING LATHE ED 1000N / ED 1000NDIG
N O T I C E
2. Type of accident
4. Injury type(s)
SAFETY
Seite 34