Intended Use; Working Conditions; Prohibited Use - Holzmann ED 1000N Originalbetriebsanleitung

12.2

Intended use

The machine in perfect working condition and as safety, and use risk-conscious! Faults which
could affect safety must be rectified immediately!
It is generally forbidden to modify safety equipment of the machine or to make ineffective!
The machine is designed exclusively for the following activities:
Longitudinal and transverse turning round or prismatic shaped workpieces made of metal, wood,
plastic or similar non-hazardous materials.
For a different or additional use and resulting damage or injury takes
HOLZMANN-MASCHINEN no responsibility or warranty.
12.3

working conditions

The machine may be operated:
humidity
temperature
The machine shall not be operated outdoors or in wet or damp areas.
The machine shall not be operated in areas exposed to increased fire or explosion hazard.
12.4

Prohibited use

 The operation of the machine outside the stated technical limits described in this manual is
forbidden.
 Operation of the machine function without emergency stop button or impeller box with open
doors is prohibited.
 The use of the machine not according with the required dimensions is forbidden.
 The use of the machine not being suitable for the use of the machine and not being certified is
forbidden.
 Any manipulation of the machine and parts is forbidden.
 The use of the machine for any purposes other than described in 12.1 is forbidden.
 The unattended operation on the machine during the working process is forbidden! It is not
allowed to leave the immediate work area during the work is being performed.
HOLZMANN MASCHINEN GmbH
Use only drills allowable for this machine!

Never use a damaged drill!

Use the machine never with defective or without mounted guard

www.holzmann-maschinen.at
METALLDREHMASCHINE / METAL TURNING LATHE ED 1000N / ED 1000NDIG
W A R N I N G
HIGHEST RISK OF INJURY!
max. 70%
+5°С to +40°С (+41°F to +104°F)
SAFETY
Seite 35