Connecting To A Macintosh Computer; Connect The Lcd Monitor To Macintosh - NEC LCD3000 Bedienerhandbuch

Connecting to a Macintosh
Connecting your Macintosh
drivers may not display images correctly.

Connect the LCD Monitor to Macintosh

• To connect the RGB 2 IN connector (mini D-sub 15 pin) on the LCD monitor, use the supplied PC - Video RGB signal cable
(mini D-sub 15 pin to mini D-sub 15 pin).
• To connect the RGB 3 DVD/HD IN connector (BNC) on the LCD monitor, use the signal cable available separately
(mini D-sub 15 pin to BNC x 5).
• If you use with a Macintosh PowerBook, set "Mirroring" to Off.
Refer to your Macintosh's owner's manual for more information about your computer's video output requirements and any special
identification or configuring your monitor's image and monitor may require.
• The AUDIO IN 1 can be used for audio input. For connection, select AUDIO 1 from the AUDIO INPUT button.
LCD monitor
LCD monitor (second monitor)
01_English
®
Computer
®
computer to your LCD monitor will enable you to display your computer's screen image. Some video cards or
To RGB 3 DVD/HD IN
BNC x 5
9
®
To analog RGB output
Mini D-sub 15 pin
English-9
31/01/2003, 20:47
To audio output
BNC x 5
Macintosh
BNC x 5