Settings; Setting The Airguard Device - Herth+Buss AirGuard Bedienhinweis

Operating Instruction

7.0 Settings

7.1 Setting the AirGuard device

Press the back button to open the settings
menu from the manufacturer selection.
TIP
Use the arrow buttons to browse
through the settings and change the pa-
rameterswiththeconfirmationbutton.
Language:
Press the enter key to select the preferred
language.
Device serial number:
Thedeviceserialnumber(S/N)helpsinstall
thelatestfirmwareontheAirGuard.
Please note: The entire firmware of the
update is determined by the device's
serial number.
53
Number of wheels:
Ifyouwanttoonlyreadcertainsensorsin-
dividually, select the value 1. If you want
theAirGuardtosavethesensordataforthe
printfunction,selectthevalue4.
Please note: Select the value 4 for
the "ID to PC" function.
Temperature:
Press the enter key to switch between Fº
or Cº
Pressure:
Press the enter key to switch between bar,
PSIandkPa.
95990001
EN