Operating Instruction
1.0 General
1.1. Area of application
EN
TheAirGuardisapre-servicehand-heldde-
vice.Itallowsworktobecarriedoutdirectly
onthevehiclewhilstoffline.Thevehicleda-
tabase, with a coverage of 80–90 per cent,
is stored in the device itself. Updates are
available free of charge from our website.
TheAirGuard is able to read out all sensor
types found on the market.Then, it is able
to automatically or manually duplicate the
read data to the Herth+Buss wheel sensors.
Programming a new sensor ID and wireless
reprogrammingofthesensorIDofactivated
Herth+Buss sensors while still installed is
also possible.
readingoutofHerth+Buss/third-party
sensors using the built-in database
programming the Herth+Buss wheel
sensors according to own database
free updates
vehiclecoverageof80–90percent
vehicledatastoredinthedeviceitself
IMPORTANT
Please ensure that the latest soft-
wareupdateisinstalledonyour
device.Seepage25foradetailed
guide.
www.herthundbuss.com
1.2. Performance data
The following functions are available:
calling up of sensor data
(temperature,pressure,battery)
readingoutofspecificsensorID
variousprogrammingfunctionsfor
the Herth+Buss wheel sensor
Please note:
Wheel sensors must be held at a
distance of 5-15 cm, parallel to the left
or right antenna.
Radio frequency:
95990001
433 Mhz
Technical data:
34