Herth+Buss AirGuard Bedienhinweis Seite 42

Operating Instruction
OE ID locator:
UsetheFINDOEIDfunctiontohelpyoufind
EN
the sensor ID for an OE sensor. Press the en-
terkeytoselect.
IMPORTANT
Theprocessofmanuallyreadingthe
correctsensorIDonlyworkswithOE
sensors.Aninstalleduniversalsensor
cannotnormallyhavethecorrectID
printed on it.
Manufacturer selection:
Use the arrow buttons to select the sensor
manufacturer.Presstheenterkeytoselect.
Please note:
You can see the number of different
sensor types from which you can select
in the bottom right corner (e.g. 1/1).
www.herthundbuss.com
Find OE ID:
TheAirGuardwillshowyouwheretheIDis
located. Certain manufacturers may have
severalsensortypes.Usethearrowbuttons
to browse between the sensor types, or
press the BACK button to go back.
Enter ID:
Use this function to manually program the
ID of the OE sensor on the Herth+Buss wheel
sensor.Presstheenterkeytoselect.
95990001
42