Herth+Buss AirGuard Bedienhinweis Seite 47

Operating Instruction
Scanning the object ID:
Place the AirGuard close to the OE or object
sensor.Presstheenterkeytodiagnosethe
sensor ID of the OE sensor.
Copying the ID to the sensor:
TheAirGuardwillshowtheIDoftheOE sen-
sor. Place the Herth+Buss wheel sensor close
to theAirGuard and press the enter key to
copythisIDtothetargetsensor.
Please note:
The target sensor should use the same
vehicle protocol as the OE sensor. As
soon as you have called up the sensor
ID, press the enter button to copy
directly to the target sensor. Pressing
the BACK button deletes the sensor ID
and the diagnosis must be repeated.
47
Modification complete:
The AirGuard will now modify the target
sensorforyou. Y ouwillheartwoshortbeeps
afterthesensorhasbeensuccessfullymodi-
fied.
95990001
EN