Transferring The Data To Pc - Herth+Buss AirGuard Bedienhinweis

Operating Instruction
TIP
EN
Ifyoureceivethemessage"Double
IDpresent",itmeansthatthedevice
has found multiple wheel sensors with
theidenticalsensorID.Pleasecheck
whetherallwheelshavedifferentsen-
sorIDs,orifyouhavereadthesame
sensor multiple times.

6.2 Transferring the data to PC

Ready to connect with PC:
Once the IDs of all wheels have been
scanned,thesystemisreadytobeconnect-
edtothePCtosavethedata.
Connecting with the PC:
RuntheTPMS "ID to PC" APP V2.0 onyour
PC and connect theAirGuard to your com-
puter using a USB cable.
Thesoftwarecanberunwithoutinstallation.
Downloadthelatestversionofthesoftware
at www.herthundbuss.com/AirGuard.
www.herthundbuss.com
Saving the ID data:
TheIDdataareautomaticallyloadedintothe
software (3–5 seconds).After this, you can
save the data by clicking on the symbol in
thetopleftcorner. T hedataaresavedinJPG
format.You can also print the values as an
imageorsavetheminExcelformat.
Please note:
1. In the event that the AirGuard turns
off, the values will be saved.
Please select the vehicle and diagnosis
function again. When the device then
asks "Delete TPMS data?", press the
back button to negate this.
2. Please note that your PC will install
drivers when you connect it to the
AirGuard with the USB cable for the
first time. Please be patient. If required,
disconnect the USB cable and reconnect
the AirGuard.
95990001
52