Operating Instruction
4.0 New sensor
4.1 Duplicating an OE sensor
Please note:
The duplication and programming
function only works with the Herth+Buss
wheel sensor. Other sensors cannot
be written.
Manufacturer selection:
Usethearrowbuttonstonavigateintheal-
phabeticaldisplay.Selectthedesiredmanu-
facturerusingtheenterkey.
Use the arrow buttons to browse between
theautomotivemanufacturersandselectthe
desiredmanufacturerusingtheenterkey.
39
Model selection:
Use the arrow buttons to browse between
the models and select the desired model us-
ingtheenterkey.
Construction year selection:
Use the arrow buttons to select the construc-
tionyearandconfirmbypressingtheenter
key.
Function selection:
Use the arrow buttons to select NEW SEN-
SORandpresstheenterkeytocontinue.
95990001
EN