Vacuum Packing With Magic Vac; Vacuum Packing In Magic Vac; Executive Containers Or With; Family Containers - Magic Vac Maxima Betriebsanleitung

7 How to use the MAN VAC button (6)
Pressing this button will cancel the preselected dial set-
ting for the Vacuum Level (2). The pump will continue
drawing out air until the button (MAN VAC) is pressed.
When you release the button the machine will automati-
cally start sealing for the time previously set with the
knob (5). (fig. M)
8 How to use the MAN SEAL button (7)
Pressing this button after the yellow light goes on will
immediately activate the sealing process. This allows you
to prevent delicate, fragile foods from being crushed (e.g.
biscuits, etc.). The sealing time will naturally depend on
the time you have previously set with knob (5). (fig. N)

9 Vacuum packing in MAGIC VAC

ners or in containers sealed with MAGIC VAC
Caps with new knob
Executive containers and the MAGIC
The MAGIC VAC ®
VAC ® Universal Caps with star-shaped knob (fig. O) make
vacuum packing easier, because the connection hose
can be directly introduced into the knob central hole (fig.
P).
MAGIC VAC Universal Caps, available in two diameters
®
(100 mm and 125 mm), are to be used on jars for preser-
ving food and bowls and receptacles made of tempered
glass. The Universal Caps work just like the Caps for
MAGIC VAC ® Executive containers.
WARNING: When using Universal Caps do not use pla-
stic or glass containers that are not suitable since they
could implode under the vacuum pressure of the
appliance and cause injury.
- Fill the container leaving at least 3 cm of room between
the contents and upper rim and position the lid on the
container. Turn the knob to the "VACUUM" position".
(fig. O)
- Connect the container lid knob to the appliance air
inlet (4) by means of the connection hose (19). (fig. P)
- Turn the Vacuum Knob (2) clockwise" to "MAX" .
- Turn the Sealing Time knob (5) counterclockwise to "1".
- Press the switch (8) to turn on the machine and lock
the lid in place by pressing the two buttons (3). The
machine will carry out a vacuum packing cycle and
turn off automatically on its completion.
- Remove the hose from the container lid knob.
- Turn the knob to the "CLOSED" position.
- To open the containers turn the knob to the "OPEN"
position; you should hear a hissing of air as it enters
the container. This sound guarantees that the contents
have been packed in a vacuum.
10 Vacuum packing in MAGIC VAC
Multipurpose containers ideal for storage of frequently
used products such as dry and fragile foods; powder
foodstuffs; fresh, pureed or strained fruit and vegetables.
Their transparency and design makes them attractive to
OPERATING INSTRUCTIONS
Warning: Do not store the machine with the LOCK buttons engaged
Executive contai-
®
® Universal

Family containers

®
display on kitchen shelves while ensuring that their con-
tents are clearly visible.
- Fill the container leaving at least 3 cm of room between
the contents and upper rim and position the lid on the
container.
- Connect the container lid knob to the unit air outlet port
(4) by means of the connection tube (19) (fig. Q).
- Turn the Vacuum Knob (2) clockwise" to "MAX" .
- Turn the Sealing Time knob (5) counterclockwise to "1".
- Press the switch (8) to turn on the machine and lock
the lid in place by pressing the two buttons (3). The
machine will carry out a vacuum packing cycle and
turn off automatically on its completion.
- Remove the hose from the container lid.
- Press the central button (20) to open the containers
(fig. Q).
11 Vacuum packing in glass jars sealed with metal caps
(Leifheit type)
Use the large-sized cap attachment to pack foods in
large-mouthed glass jars with a metal cap. A small-sized
cap attachment is also available for narrow-mouthed jars
sealed with metal caps.
- Fill the container leaving at least 3 cm of room between
the contents and upper rim.
- Connect the cap attachment (21) to the air inlet (4) of
the appliance by means of the connection hose (19).
Place the cap attachment directly on the jar with the
metal cap only (22) and press down, making sure it fits
correctly (fig. R).
- Turn the Vacuum Knob (2) clockwise" to "MAX" .
- Turn the Sealing Time knob (5) counterclockwise to "1".
- Press the switch (8) to turn on the machine and lock
the lid in place by pressing the two buttons (3). The
machine will carry out a vacuum packing cycle and
turn off automatically on its completion. Make sure
that the cap attachment holds firmly, keeping it pres-
sed with the your hand.
- Disconnect the hose from the cap attachment. Remove
the cap attachment from the jar.
- Apply the ring (23) supplied with the jar and screw it
down all the way (fig. R).
- To open a glass jar vacuum-sealed with a metal cap,
use the cap opener provided (the side with writing
should be turned up). Position the cap opener as
shown in figure S and gently pry open the cap until the
vacuum is released. Remove the metal cap. This
accessory allows you to reuse the cap.
12 Vacuum packing with MAGIC VAC bottle caps
The MAGIC VAC ® Bottle Cap may be used to seal partly
filled bottles of wine or non-fizzy beverages. Using the
Bottle Cap will allow you to create a vacuum inside the
bottle so as to slow down oxidisation and preserve the
freshness and flavour of its contents for a longer time.
- By means of the connection hose (19) connect the air
inlet (4) of the appliance to the MAGIC VAC
17
®
® Bottle Cap