Oce VarioStream 7100 Sicherheitsinformation Seite 22

Cleaning the Fuser Station
Cleaning modules, eliminating faults
[39]
[40]
22 Chapter 1 Safety Information (US)
Danger of There is a risk of injury due to crushing:
crushing
Mind your fingers.
Hot surfaces During operation, the components in the fuser
station reach a surface temperature of
approximately 150
can cause burns.
Allow the printing system to cool down for at
least 30 minutes, with the fuser station open.
When folding up and swiveling the fuser
station into position.
When releasing the locking mechanism and
simultaneously sliding in the fuser station.
o
C. Touching the components