Oce VarioStream 7100 Sicherheitsinformation Seite 12

General Information
Do not route the lines and cables in such a way that they can be stepped on or
tripped over.
All printing system accessories and options must comply with statutory
regulations and directives for safety, electromagnetic compatibility and
telecommunications terminal devices, as well as with the specifications
published by Océ Printing Systems GmbH.
The installation of other accessories and options may constitute a violation of
these requirements and directives, and may also damage the printing system.
Consult Service personnel for details of which accessories and options are
permitted for the printing system.
With the exception of optical wave guide connections, all data, signaling,
process, measurement and control lines connecting the printing system with
other devices must be properly shielded and grounded.
Data transmission lines should neither be connected nor disconnected during
electrical storms.
Repairs
Repairs to the printing system must only be carried out by Service personnel.
Access to locked areas and areas that can only be opened with special tools is
reserved for Service personnel. Opening a service area without authorization and
improperly effected repairs may put operators at considerable risk.
The access ticket used by the Service technician ensures that the printing system
cannot be used via a LAN from a remote operator panel during repair work.
Fire
Poisonous gases can occur in any fire. They can also result from the printing Océ
VarioStream 7100 system.
Self-contained breathing apparatus must be worn when fighting fire or smoke
emission. Instructions to this effect should be stored at the fire alarm center and
with the local fire department.
12 Chapter 1 Safety Information (US)