Retrieve; Display; Download - Megger DUCTER DLRO 10X Bedienungsanleitung

General Operation - DLRO 10X

Retrieve

allows the recall of stored results to the display or a PC.

Display

recalls each test, in sequence, to the instrument display
TEST NUMBER 2
DD MM YY HH MM
09/10/00 12:24
TEST NORMAL
AVERAGE
FORWARD
REVERSE
CURRENT
RESULTS
starting with the latest stored result.
Use the cursor control Up and Down controls to step
later or earlier respectively through the stored results.
Alternatively, if you know the index number of the test
you wish to display, type the number on the keypad and
press Enter.
An asterisk (*) next to the word "MEMO" means that
there are notes attached to this result. Press the right
cursor control to view the notes.
8
µΩ
12.6
µΩ
14.0
µΩ
11.2
10 A
*
MEMO

Download

causes the entire contents of the data store to be output
to the RS232 port to the left of the display. A copy of
AVO Download Manager, which facilitates downloading
and formats the data, is supplied.
Downloading data does not cause the stored data to be
erased from memory. To clear data from memory see
"Delete Data" below.
Please note - DLRO 10X also makes data available via the
RS232 Port in real time and is suitable for printing on a self-
powered serial printer.
The output has the following form:
TEST NUMBER
TEST TYPE
DD MM YY HH MM
01/01/00 00:33
FORWARD RESISTANCE
REVERSE RESISTANCE
AVERAGE RESISTANCE
SELECTED CURRENT
UPPER LIMIT
LOWER LIMIT
PASS/FAIL
The last three lines will only appear if passbands have been set