Synchronisation With An External Twilight Switch; Synchronising The Unit With The Led Illuminators - Videotec ULISSE Bedienungsanleitung

8.11.2 Synchronisation with an external
twilight switch
To synchronise the illuminators and camera with an
external light sensitive switch you need to:
• Connect the twilight switch to the terminals: LNO/
AGND (8.5.3 Connection of the alarm inputs, of the
twilight switch and of the relays, page 24).
• Adjust the left illuminator (MASTER):
• Lighting threshold: Set the value to the
minimum (8.11.7 LED illuminator switching on
threshold adjustment, page 32).
• Infrared power: Set the value as needed (8.11.8
LED illuminator power adjustment, page 32).
• Adjustment of the the illuminator on the right
(SLAVE):
• Lighting threshold: Set the value to the
maximum (8.11.7 LED illuminator switching on
threshold adjustment, page 32).
• Infrared power: Set the value to the minimum (
8.11.8 LED illuminator power adjustment, page
32).
MNVCUPTDMB_1511_EN
• For the unit with integrated module set the
External value to the IR Probe entry of the Infrared
menu (10.1.8.10 Advanced Setting Menu (Infrared),
page 50).
INFRARED
------------------------
1>IR PROBE
Fig. 48
8.11.3 Synchronising the unit with the
LED illuminators
To synchronise the unit with the LED illuminators it is
necessary to:
• Adjust the left illuminator (MASTER):
: EXT.
29