Safety Precautions - Comet SC 147 Anweisungshandbuch

interfere with the moving part located inside the bell.
To clean the walls (fig. 6), grip the handlebar (7) with one hand and with the other grip the spray
gun. Operate with ample movements for best results.
6
STOP
After finishing the job, close the water supply tap and to drain the water under pressure inside
the machine, allow it to operate for a few seconds with the spray gun lever pressed.
Switch-off the high-pressure cleaner and disconnect the plug from the power socket.
Empty the detergent out of the tank and rinse it with clean water. Also wash the lower part of
the bell.
Store the surface cleaner in a dry environment protected against frost.

SAFETY PRECAUTIONS

m
Read and follow the high-pressure cleaner safety regulations.
During operation, do not introduce hands or feet below the edge of the surface cleaner bell.
In case any jobs have to be done on the surface cleaner, stop the high-pressure cleaner and
disconnect it from the spray gun.
Do not use corrosive detergent liquids.
The max temperature of inflowing water must be 50 °C.