Identification Of Components; Safety Devices - Comet K Xtreme 700 bar Bedienungs- Und Wartungsanleitung

Elektrische kaltwasser-hochdruckreiniger

Vorschau ausblenden

100

Inhalt

101

Inhaltsverzeichnis

Verfügbare Sprachen

Refer to Figures 2 to 11:

1. ON/OFF Master switch

2. Handle

3. Lance support

4. Warning plates. Inform on residual risks and PPE

to be used

5. Identification plate. Indicates the serial number,

guaranteed sound power value (in compliance

with Directive 2000/14/EC) and main technical

characteristics

6. Power cable

7. Delivery hose/power cable support

8. Pressure adjustment knob

9. Pressure indicator

10. Water outlet fitting

11. Water inlet fitting

12. Water inlet filter

13. Wheel brake

14. START push button

15. Spray gun lever

16. Spray gun lever safety stop

17. Spray gun

18. Water inlet hose-end fitting

19. Water inlet filter cartridge

20. Lance hose

Manually resettable ampere cut-out protection

- move the master switch (1) to "0" position and remove the plug from the power socket;

- press the spray gun (17) lever (15), so as to release any residual pressure;

- have a Specialized Technician check the high pressure cleaner because the device has to be reset

manually and to do this it is necessary to access the inside of the electrical panel.

• Pressure unloader/regulation valve.

Valve, suitably calibrated by the Manufacturer, for regulating work pressure by means of the knob (8)

and that allows the pumped fluid to return to pump suction thus preventing the onset of dangerous

pressures, when closing the spray gun or when trying to set a pressure that is above the maximum

permitted values.

• Spray gun lever lock device.

Safety stop (16) for locking the spray gun (17) lever (15) in the closed position so it cannot be started

accidentally (Fig. 5, position S).

• Emergency push button.

Following a condition of danger, pressing push button (25) stops the machine immediately.

Remember that the push button stays down mechanically: to restart the machine proceed as explained

in the "Operation" paragraph.