Deleting Messages; Remote Access - switel DCT8572 Bedienungsanleitung

- Telephone Answering Machine -
13.8

Deleting messages

13.8.1 Deleting one message
k
N
13.8.2 Deleting all messages and the memo
All the old messages and the memo are deleted from the memory. The new
messages are retained. If the memo has not yet been played back, it is not
deleted.
N
13.9

Remote access

Remote access enables the answering machine to be contacted from any
telephone which uses tone dialling in order to listen to messages received
and execute other functions.
13.9.1 Remote access security code
The answering machine is provided with a personal access number so only
you can listen to incoming messages via the remote access feature. The
default security code set at the factory is 321".
13.9.2 Changing the remote access security code
Proceed as follows to change the security code:
c or d,
c or d,
c or d,
13.9.3 Playing back messages via remote access
M
*, M
If the security code is entered incorrectly three times, the line is
automatically disconnected.
2
Other functions can be executed via the remote access system
within the following 10 seconds. Refer to the table in Chapter
13.9.4.
Replace receiver
Playback messages
Press for 2 seconds during the message
playback
Press for 2 seconds
Press the button on the underside of the
base station for 2 seconds
Change 1st digit and confirm
Change 2nd digit and confirm
Change 3rd digit and confirm
Dial your own phone number
Press during the outgoing message and
enter the security code
Play back message
End remote access
141